<rt id="bn8ez"></rt>
<label id="bn8ez"></label>

  • <span id="bn8ez"></span>

    <label id="bn8ez"><meter id="bn8ez"></meter></label>

    ivaneeo's blog

    自由的力量,自由的生活。

      BlogJava :: 首頁 :: 聯系 :: 聚合  :: 管理
      669 Posts :: 0 Stories :: 64 Comments :: 0 Trackbacks

    This tutorial explains how to configure your cluster computers to easily start a set of Erlang nodes on every machine through SSH. It shows how to use the slave module to start Erlang nodes that are linked to a main controler.

    Configuring SSH servers

    SSH server is generally properly installed and configured by Linux distributions, if you ask for SSH server installation. The SSH server is sometime called sshd, standing for SSH deamon.

    You need to have SSH servers running on all your cluster nodes.

    Configuring your SSH client: connection without password

    SSH client RSA key authentification

    To be able to manage your cluster as a whole, you need to set up your SSH access to the cluster nodes so that you can log into them without being prompt for a password or passphrase. Here are the needed steps to configure your SSH client and server to use RSA key for authentification. You only need to do this procedure once, for each client/server.

    1. Generate an SSH RSA key, if you do not already have one:
      ssh-keygen -t rsa
          
    2. Copy the id_rsa.pub file to the target machine:
      scp .ssh/id_rsa.pub userid@ssh2-server:id_rsa.pub
          
    3. Connect through SSH on the server:
      ssh userid@ssh2-server
          
    4. Create a .ssh directory in the user home directory (if necessary):
      mkdir .ssh
          
    5. Copy the contents of the id_rsa.pub file to the authorization file for protocol 2 connections:
      cat id_rsa.pub >>$HOME/.ssh/authorized_keys
          
    6. Remove the id_rsa.pub file:
      rm $HOME/id_rsa.pub
          

      Alternatively, you can use the command ssh-copy-id ssh2-server, if it is available on your computer, to replace step 2 to 6. ssh-copy-id is for example available on Linux Mandrake and Debian distributions.

    Adding your identity to the SSH-agent software

    After the previous step, you will be prompted for the passphrase of your RSA key each time you are initialising a connection. To avoid typing the passphrase many time, you can add your identity to a program called ssh-agent that will keep your passphrase for the work session duration. Use of the SSH protocol will thus be simplified:

    1. Ensure a program called ssh-agent is running. Type:
      ps aux | grep ssh-agent
          

      to check if ssh-agent is running under your userid. Type:

      pstree
          

      to check that ssh-agent is linked to your current window manager session or shell process.

    2. If ssh-agent is not started, you can create an ssh-agent session in the shell with, for example, the screen program:
      ssh-agent screen
          

      After this command, SSH actions typed into the screen console will be handle through the ssh-agent.

    3. Add your identity to the agent:
      ssh-add
          

      Type your passphrase when prompted.

    4. You can list the identity that have been added into the running ssh-agent:
      ssh-add -l
          
    5. You can remove an identity from the ssh-agent with:
      ssh-add -d
          

    Please consult ssh-add manual for more options (identity lifetime, agent locking, ...)

    Routing to and from the cluster

    When setting up clusters, you can often only access the gateway/load balancer front computer. To access the other node, you need to tell the gateway machine to route your requests to the cluster nodes.

    To take an example, suppose your gateway to the cluster is 80.65.232.137. The controler machine is a computer outside the cluster. This is computer where the operator is controling the cluster behaviour. Your cluster internal adresses form the following network: 192.0.0.0. On your client computer, launch the command:

    route add -net 192.0.0.0 gw 80.65.232.137 netmask 255.255.255.0
    
    This will only works if IP forwarding is activated on the gateway computer.

    To ensure proper routing, you can maintain an common /etc/hosts file with entries for all computers in your cluster. In our example, with a seven-computers cluster, the file /etc/hosts could look like:

    10.9.195.12   controler
    80.65.232.137 gateway
    192.0.0.11    eddieware
    192.0.0.21    yaws1
    192.0.0.22    yaws2
    192.0.0.31    mnesia1
    192.0.0.32    mnesia2
    

    You could also add a DNS server, but for relatively small cluster, it is probably easier to manage an /etc/hosts file.

    Starting Erlang nodes and setting up the Erlang cluster

    Starting a whole Erlang cluster can be done very easily once you can connect with SSH to all cluster node without being prompt for a password.

    Starting the Erlang master node

    Erlang needs to be started with the -rsh ssh parameters to use ssh connection to the target nodes within the slave command, instead of rsh connection. It also need to be started with network enable with the -sname node parameter.

    Here is an example Erlang command to start the Erlang master node:

    erl -rsh ssh -sname clustmaster
    

    Be carefull, your master node short name has to be sufficent to route from the slave nodes in the cluster to your master node. The slave:start timeout if it cannot connect back from the slave to your master node.

    Starting the slave nodes (cluster)

    The custom function cluster:slaves/1 is a wrapper to the Erlang slave function. It allows to easily start a set of Erlang node on target hosts with the same cookie.

    -module(cluster).
    -export([slaves/1]).
    %% Argument:
    %% Hosts: List of hostname (string)
    slaves([]) ->
    ok;
    slaves([Host|Hosts]) ->
    Args = erl_system_args(),
    NodeName = "cluster",
    {ok, Node} = slave:start_link(Host, NodeName, Args),
    io:format("Erlang node started = [~p]~n", [Node]),
    slaves(Hosts).
    erl_system_args()->
    Shared = case init:get_argument(shared) of
    error -> " ";
    {ok,[[]]} -> " -shared "
    end,
    lists:append(["-rsh ssh -setcookie",
    atom_to_list(erlang:get_cookie()),
    Shared, " +Mea r10b "]).
    %% Do not forget to start erlang with a command like:
    %% erl -rsh ssh -sname clustmaster
    

    Here is a sample session:

    mremond@controler:~/cvs/cluster$ erl -rsh ssh -sname demo
    Erlang (BEAM) emulator version 5.3 [source] [hipe]
    Eshell V5.3 (abort with ^G)
    (demo@controler)1> cluster:slaves(["gateway", "yaws1", "yaws2", "mnesia1", "mnesia2", "eddieware"]).
    Erlang node started = [cluster@gateway]
    Erlang node started = [cluster@yaws1]
    Erlang node started = [cluster@yaws2]
    Erlang node started = [cluster@mnesia1]
    Erlang node started = [cluster@mnesia2]
    Erlang node started = [cluster@eddieware]
    ok
    

    The order of the nodes in the cluster:slaves/1 list parameter does not matter.

    You can check the list of known nodes:

    (demo@controler)2> nodes().
    [cluster@gateway,
    cluster@yaws1,
    cluster@yaws2,
    cluster@mnesia1,
    cluster@mnesia2,
    cluster@eddieware]
    

    And you can start executing code on cluster nodes:

    (demo@controler)3> rpc:multicall(nodes(), io, format, ["Hello world!~n", []]).
    Hello world!
    Hello world!
    Hello world!
    Hello world!
    Hello world!
    Hello world!
    {[ok,ok,ok,ok,ok,ok],[]}
    
    If you have trouble with slave start, you can uncomment the line:
    %%io:format("Command: ~s~n", [Cmd])
    before the open_port instruction:
    open_port({spawn, Cmd}, [stream]),
    in the slave:wait_for_slave/7 function.
    posted on 2011-03-18 17:09 ivaneeo 閱讀(1088) 評論(0)  編輯  收藏 所屬分類: erlang-分布式語言
    主站蜘蛛池模板: 亚洲日本人成中文字幕| 无码免费又爽又高潮喷水的视频| 国产视频精品免费视频| 毛片免费在线观看| 国产成人无码免费看视频软件 | 免费国产高清视频| 亚洲AV无码成人精品区天堂| 亚洲乱码卡三乱码新区| 99无码人妻一区二区三区免费 | 日韩久久无码免费毛片软件| www亚洲一级视频com| a一级爱做片免费| 久久精品亚洲综合专区| 日韩免费无码一区二区三区| 亚洲第一香蕉视频| 成人毛片免费在线观看| 另类专区另类专区亚洲| 亚洲午夜激情视频| 亚洲精品国产精品国自产网站| 免费人成在线视频| 羞羞视频在线免费观看| www.999精品视频观看免费| 国产成人亚洲合集青青草原精品 | 国产精品成人免费福利| 亚洲日韩一区精品射精| 亚洲精品尤物yw在线影院| a级毛片100部免费观看| 亚洲成a人片在线观| 久久久久久AV无码免费网站 | 性做久久久久免费看| 一级做a爰全过程免费视频毛片| 最近的免费中文字幕视频| 国产亚洲精品仙踪林在线播放| 国产亚洲成AV人片在线观黄桃| 在线播放亚洲精品| 久久精品国产亚洲av麻| 成年私人影院免费视频网站| 国产国产人免费人成成免视频| 亚洲美女大bbbbbbbbb| 亚洲国产精品成人久久蜜臀| 久久国产高潮流白浆免费观看|