2009年3月2日
Ubuntu is not an official supported linux version from Oracle, so I still get some errors during the install process even with required configuration, anyway, it can work and what i'm doing here is try to setup an experiment environment, it's enough to me, any one who want to deploy Oracle in product mode should have supported linux platform like RedHat, OK, following is the steps i have to install it:
1. If you were in multihomed enviroment, set the ORACLE_HOSTNAME variable:
export ORACLE_HOSTNAME=machine_name.domain_name
2. Create create OSDBA (dba) group, Oracle Inventory group (oinstall) and a user "oracle" which has "dba" as its login group and oinstall as its 2nd group.
3. Modify /etc/sysctl.conf, set kernel parameter:
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 1048576
net.core.rmem_max = 1048576
net.core.wmem_default = 262144
net.core.wmem_max = 262144
4. Modify /etc/security/limits.conf to improve the "number of process" and "number of open file" performance for oracle:
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
5. Modify /etc/pam.d/login, add:
session required /lib/security/pam_limits.so
session required pam_limits.so
6. Modify /etc/profile:
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
7. Change user to oracle if you haven't done it yet
8. Create base directory, for me it's "/app/oracle"
9. Export ORACLE_BASE, ORACLE_SID
export ORACLE_BASE=/app/oracle
export ORACLE_SID=orcl
10. If you're trying to install oracle with a X window:
DISPLAY=your.ip.address:0.0 ; export DISPLAY
11. run installer:
./runInstaller
12. Oracle should start, if the installer GUI cannot be start, check the error messages, most time it's because a wrong X window configuration, if you are running X window with Xming, just like me, please do make sure to check the "No Access Control" check box in the launch, otherwise, Xming will reject the connection.
13. Now the GUI shoudl open, like what you did in the Windows system, fullfill required value and click next, ingore all errors if there is any condition that is not match, click finish in the last step, it should start install process.
14. After install oracle, the installer GUI will ask you to run two .sh files, run it with a root role.
15. You can try to visit
https://you.ip.address:1158/em to see is that OK for you.
16. How to start oracle:
export ORACLE_BASE=/app/oracle
export ORACLE_HOME=/app/oracle/product/11.2.0/dbhome_1
export ORACLE_OWNR=oracle
export ORACLE_SID=orcl
export PATH=$PATH:$ORACLE_HOME/bin
lsnrctl start
sqlplus /nolog
connect /as sysdba
startup
quit
emctl start dbconsole
Reference
http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/pre_install.htm#BABDFJAE
1. Type command: lsusb
Bus 002 Device 003: ID 19d2:fff5 ONDA Communication S.p.A.
2. Install "usb-modeswitch", then re-plugin modem again and input command "lsusb" again, you should get the following output
Bus 002 Device 003: ID 19d2:fff1 ONDA Communication S.p.A.
3. Notice in step #2, the product code has been changed from "fff5" to "fff1".
4. Install package "wvdial" which is used to dail up
5. Type command: "sudo modprobe usbserial vendor=0x19d2 product=0xfff1", don't forget the "sudo"
6. Type command: "sudo wvdialconf", again don't forget the "sudo", this will detect your modem
7. Modify file "/etc/wvdial.conf", following is what I have:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
New PPPD = 1
Phone = #777
Modem = /dev/ttyUSB0
Username = yourName
Password = yourPassword
Baud = 921600
Stupid Mode = 1
Tonline = 0
8. Repeat step #5 again and then if you with not bad luck type in command "sudo wvdial", you should connect in.
9. If bad luck with you, click right-upper corner, there is a connection configuration menu, you can create "Mobile Broadband" connection yourself here, don't forget input the phone number "#777" (for China Telcom) and your username password, after that click connect, this works for me.
10. Good luck with you.
11. BTW, if it still cannot work, try to re-plug in the modem.
1. It will not get data from DB when just open the cursor, data will be loaded as an ongoing basis.
2. SCN: System Change Number/System Commit Number
3. FLASH BACK AS OF SCN;
4. You can also flash back table: FLASHBACK TABLE SOME_TABLE TO SCN :SCN_NUM;
5. But before you do a flash back operation on a table, do make sure you have already enbale ROW MOVEMENT on that table.
1. Do use oracle "Bind variable", it can increase the speed by 90 percent in 10g release1.
2. Understand how to use "lock", read never block write, vice verse.
3. There is a side effect from oracle regarding to the "lock", if you do want to control the access to one row at a specify time (like doing an if 'this row belong to some search condition' then 'modify this row' action), you have to write some logic yourself, for example use the "for update" statement, like: "select * from x where x.id = 1 for update", so that you can lock the row only with id equals to '1' and then modify this row, so that some orther concurrence requests should execute the same sql first, yes, with the same 'for update' statement, and because you already have locked this row(id = 1), orther requests cannot get the access to it, and you get the access control to this row.
4. Regardint to item 3, it will not decrease the concurrence level, because first you only lock the item with id equals to 1 and there maybe thousands of items in your table, second, it will not block the read request.
這該死的問題讓我竟然沒有想到解決方案...腦子生銹了？呵呵，算了...
該問題最經典的解答，簡直是一句話驚醒夢中人啊
“用兩個指針，一個的步長為 1，另外一個的為 2，從表頭開始一起往前走，如果相遇，表明有環路，否則就是沒有了。”
下來，不用說什么了吧，用JAVA實現的話，聲明兩個Iterator A 和 B，A 每次調用兩個NEXT，B只調用一次，如果他們能夠相遇，就是有環...我操