2012年3月14日
select * from INFORMATION_SCHEMA.TABLES where TABLE_SCHEMA = 'DBNAME' order by create_time desc;
ps -ef|grep java
kill -9 1231
導出數據庫
直接使用命令:
mysqldump -u root -p abc >abc.sql
然后回車輸入密碼就可以了;
mysqldump -u 數據庫鏈接用戶名 -p 目標數據庫 > 存儲的文件名
文件會導出到當前目錄下
導入數據庫(sql文件)
mysql -u 用戶名 -p 數據庫名 < 數據庫名.sql
mysql -u abc -p abc < abc.sql
注意sql文件必須在當前目錄下,如果不在當前目錄下需要在< 之后加上具體sql文件路徑
GBK: create database test2 DEFAULT CHARACTER SET gbk COLLATE gbk_chinese_ci;
UTF8: CREATE DATABASE `test2` DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci;
DELIMITER //
CREATE PROCEDURE proc_tmp()
BEGIN
DECLARE done INT DEFAULT 0;
DECLARE product_Id VARCHAR(255);
DECLARE yuanliao VARCHAR(255);
DECLARE miaoshu VARCHAR(255);
DECLARE shazhi VARCHAR(255);
DECLARE midu VARCHAR(255);
DECLARE mf VARCHAR(255);
DECLARE zuzhi VARCHAR(255);
DECLARE quality VARCHAR(255);
DECLARE shuliang VARCHAR(255);
DECLARE jiage VARCHAR(255);
DECLARE price_date VARCHAR(255);
DECLARE idCur CURSOR FOR SELECT productId,yl,ylms,sz,md,fk,zz,qa,amount,price,pricedate FROM sheet1;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1;
OPEN idCur;
REPEAT
FETCH idCur INTO product_Id,yuanliao,miaoshu,shazhi,midu,mf,zuzhi,quality,shuliang,jiage,price_date;
IF NOT done THEN
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'yl',yuanliao,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'ylms',miaoshu,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'sz',shazhi,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'md',midu,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'fk',mf,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'zz',zuzhi,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'qa',quality,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'amount',shuliang,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'price',jiage,product_Id);
INSERT INTO static_data(model_id,dataKey,dataVal,product_id) VALUES(3,'pricedate',price_date,product_Id);
END IF;
UNTIL done END REPEAT;
CLOSE idCur;
END//
DELIMITER ;
CALL proc_tmp();
DROP PROCEDURE proc_tmp;
DELETE FROM sheet1;
定義的變量不能和select里的同名
摘要: 小編整理的“宜興市主要鄉村旅游點瓜果采摘攻略”,希望能成為您瓜果采摘的好幫手!!!農家樂聯系人手機采摘項目籬笆園農家樂黃亞云13815118337草莓5月-11月挖筍 野菜 采茶 制烏米飯3-5月桑葚 4月油桃 5月 楊梅 6月下旬-7月中下旬 葡萄 7月-9月 挖百合 8月 板栗 9月底-10月份 綠緣生態農業有限公司陳慶元13701539886挖筍 挖野菜 3-4月 ...
閱讀全文
桑葚采
摘
好去處
芳橋
1、綠大地果桑種植基地 13063669929
2、碧園春生態園 13771359607
3、張慕果園 13812203223
4、金沙灘蔬果園 13585035093
建議采摘路線:市區→東氿大道→百合大道→芳塍路往北(詳見地圖指示)

西渚
◆【1】甲有農林生態園
地址:宜興市西渚鎮張戴公路白塔村部旁(近振元南路)
◆【2】白塔云芯林果專業合作社桑葚采摘園
地址:白塔村委入口斜對面張戴公路邊
◆【3】小杭采摘園
自駕線路: 宜興——橫山水庫
◆【4】白塔瓜果基地
自駕線路:導航即到
徐舍
◆ 蘇合農產品銷售專業合作聯社
自駕線路:麥德龍——G104(行駛16.6公里)——徐舍鎮潘東村
湖?
◆【1】籬笆園農家樂
地址:宜興市湖?鎮洑西村
◆【2】金沙灣農莊
地址:宜興市湖?鎮東興村
【燒烤清單】
1‘.燒烤工具:
燒烤架、網架、木炭、燒烤叉、小毛刷、打火機、助燃劑、竹簽、牙簽、水果刀、報紙、
一次性筷、一次性碗、一次性盤、一次性隔熱手套、紙杯、餐巾紙、濕巾紙、桌布、燒烤圍裙、垃圾袋燒烤夾(夾取生食)
2.調料:
調和油、鹽、醬油、燒烤醬(汁)、辣椒粉(老干媽)、孜然、五香粉、番茄醬、芝麻、胡蘿卜醬、甜面醬、海鮮調料、大蒜、姜、蔥花、蜂蜜、
3、食品:
葷菜:雞翅、排骨、香腸、火腿腸、牛肉、羊肉、五花肉、各式魚丸肉丸、雞珍、黃花魚、秋刀魚、鯽魚、魷魚、墨魚仔、蝦等
素菜:玉米、韭菜、蘑菇、茄子、土豆、青椒、生菜(生菜包肉)、花菜、香干、臭干子、小鏝頭、年糕、面包片、棉花糖、皮蛋、胡蘿卜/黃瓜、藕片、等
水果:香蕉、木瓜、蘋果、梨、菠蘿、哈密瓜等
4、飲料:礦泉水、可樂(去油膩)、涼茶(降火)、橙汁、啤酒等
$.ajax({
url:"${base}/bosImg.xml",
dataType:"xml",
success:function(data){
$(data).find("bosPicture[wlbh='"+wlbh+"'][size='800']").find("imgs").each(function (i){
$('#showbox').empty();
$(this).children('img').each(function (ii){
$('#showbox').append('<img src="'+$(this).text()+'" width="280" height="280" />');
})
});
},
error:function(XMLHttpRequest, textStatus, errorThrown) {
alert(XMLHttpRequest.status);
alert(XMLHttpRequest.readyState);
alert(textStatus);
}
grep -rn "2002675" ./catalina.out
在Freemarker中,如果要判斷序列中是否包含某個指定的元素,可以使用freemarker的內建函數seq_contains。
注:seq_contains這個內建函數從FreeMarker 2.3.1 版本開始可用。而在2.3 版本中不存在。
使用示例:
Freemarker代碼

- <#--聲明一個序列,包含若干個元素-->
- <#assign x = ["red", 16, "blue", "cyan"]>
- <#--使用seq_contains判斷序列中的元素是否存在-->
- "blue": ${x?seq_contains("blue")?string("yes", "no")}
- "yellow": ${x?seq_contains("yellow")?string("yes", "no")}
- 16: ${x?seq_contains(16)?string("yes", "no")}
- "16": ${x?seq_contains("16")?string("yes", "no")}
輸出結果:
Freemarker代碼

- "blue": yes
- "yellow": no
- 16: yes
- "16": no
附:seq_前綴在這個內建函數中是需要的,用來和contains 區分開。contains函數用來在字符串中查找子串(因為變量可以同時當作字符串和序列)。
命令行下具體用法如下: mysqldump -u用戶名 -p密碼 -d 數據庫名 表名 腳本名;
1、導出數據庫為dbname的表結構(其中用戶名為root,密碼為dbpasswd,生成的腳本名為db.sql)
mysqldump -uroot -pdbpasswd -d dbname >db.sql;
2、導出數據庫為dbname某張表(test)結構
mysqldump -uroot -pdbpasswd -d dbname test>db.sql;
3、導出數據庫為dbname所有表結構及表數據(不加-d)
mysqldump -uroot -pdbpasswd dbname >db.sql;
4、導出數據庫為dbname某張表(test)結構及表數據(不加-d)
mysqldump -uroot -pdbpasswd dbname test>db.sql;
D:\MyDrivers\software\mysql-5.6.26-winx64\bin>mysqldump -h192.168.2.4 -uroot -p -d dy cotton>ee.sql
可以看到solr有哪些子命令,如 start, stop, restart, status, healthcheck, create, create_core, create_collection, delete, version
啟動start
bin/solr start -help 查看start幫助
bin/solr start -p 8984 指定端口啟動
bin/solr start -cloud 啟動分布式版本
bin/solr start -e cloud -noprompt -e表示要啟動一個現有的例子,例子名稱是cloud,cloud這個例子是以SolrCloud方式啟動的
bin/solr restart 重啟項目
create
如果是單機版要創建core,如果是分布式的要創建collection
bin/solr create -help 查看create幫助
abc目錄的位置創建在solr.solr.home(默認是solr的server/solr目錄)目錄下
post提交數據生成索引
bin/post -c abc docs/
向名為abc的core或collection提交數據,數據源在docs/目錄中
刪除
bin/solr delete -c abc 刪除一個core或collection
刪除索引
bin/post -c abc -d "<delete><id>/home/matthewi/software/solr-5.4.1/docs/solr-morphlines-core/allclasses-noframe.html</id></delete>"
重新執行上面的搜索可以看到搜索結果的數量少了一條:numFound列
bin/post -c abc -d "<delete><query>*:*</query></delete>"
刪除所有數據
狀態
摘要: nginx.conf配置:location / { proxy_pass http://127.0.0.1:8080/myweb/;proxy_redirect off;proxy_set_header Host $host;proxy_set_header X-Real-IP $remote_addr;proxy_set_header X-Forwarded-For $proxy_ad...
閱讀全文
摘要: 一,登錄要Post的表單數據是什么這部分可以使用Wireshark工具來抓包就可以了,發現需要以下數據:“_xsrf” = xxxx(這是一個變動的數據,需要先活取獲取知乎首頁源碼來獲得) “email” = 郵箱 “password” = 密碼 “rememberme” ...
閱讀全文
public
class
ClientFormLogin {
public
static
void
main(String[] args)
throws
Exception {
BasicCookieStore cookieStore =
new
BasicCookieStore();
CloseableHttpClient httpclient = HttpClients.custom()
.setDefaultCookieStore(cookieStore)
.build();
try
{
HttpGet httpget =
new
HttpGet(
"http://..."
);
CloseableHttpResponse response1 = httpclient.execute(httpget);
try
{
HttpEntity entity = response1.getEntity();
System.out.println(
"Login form get: "
+ response1.getStatusLine());
System.out.println(
"Initial set of cookies:"
);
List<Cookie> cookies = cookieStore.getCookies();
if
(cookies.isEmpty()) {
System.out.println(
"None"
);
}
else
{
for
(
int
i =
0
; i < cookies.size(); i++) {
System.out.println(
"- "
+ cookies.get(i).toString());
}
}
//輸出網頁源碼
String result = EntityUtils.toString(response1.getEntity(),
"utf-8"
);
System.out.println(result); EntityUtils.consume(entity);
}
finally
{
response1.close();
}
}
}
package org.yla.test;
import java.net.URI;
import java.util.ArrayList;
import java.util.List;
import org.apache.commons.httpclient.HttpClient;
import org.apache.commons.httpclient.methods.GetMethod;
import org.apache.http.Header;
import org.apache.http.HttpEntity;
import org.apache.http.HttpHost;
import org.apache.http.auth.AuthScope;
import org.apache.http.auth.Credentials;
import org.apache.http.auth.UsernamePasswordCredentials;
import org.apache.http.client.CredentialsProvider;
import org.apache.http.client.entity.UrlEncodedFormEntity;
import org.apache.http.client.methods.CloseableHttpResponse;
import org.apache.http.client.methods.HttpGet;
import org.apache.http.client.methods.HttpPost;
import org.apache.http.impl.client.BasicCredentialsProvider;
import org.apache.http.impl.client.CloseableHttpClient;
import org.apache.http.impl.client.HttpClientBuilder;
import org.apache.http.impl.client.HttpClients;
import org.apache.http.message.BasicNameValuePair;
import org.apache.http.util.EntityUtils;
import org.junit.Test;
public class HttpClientTest {
String url = "xxxxxxxxxxxxxxxxxxxxxxxxx";
String ip = "202.107.233.85";
int port = 8080;
String username = "";
String password = "";
/**
* 使用HttpClient4實現代理 202.107.233.85 8080
*
* @throws Exception
*/
@Test
public void test1() throws Exception {
HttpClientBuilder build = HttpClients.custom();
HttpHost proxy = new HttpHost(ip, port);
CloseableHttpClient client = build.setProxy(proxy).build();
HttpGet request = new HttpGet(url);
CloseableHttpResponse response = client.execute(request);
HttpEntity entity = response.getEntity();
System.out.println(EntityUtils.toString(entity));
}
/**
* 使用httpclient3實現代理
*
* @throws Exception
*/
@Test
public void test2() throws Exception {
HttpClient httpClient = new HttpClient();
httpClient.getHostConfiguration().setProxy(ip, port);
GetMethod method = new GetMethod(url);
httpClient.executeMethod(method);
String result = new String(method.getResponseBody());
System.out.println(result);
}
/**
* 使用httpclient4實現代理(帶密碼的代理)
*
* @throws Exception
*/
@Test
public void test3() throws Exception {
HttpClientBuilder build = HttpClients.custom();
CredentialsProvider credentialsProvider = new BasicCredentialsProvider();
AuthScope authscope = new AuthScope(ip, port);
Credentials credentials = new UsernamePasswordCredentials(username,
password);
credentialsProvider.setCredentials(authscope, credentials);
CloseableHttpClient client = build.setDefaultCredentialsProvider(
credentialsProvider).build();
HttpGet request = new HttpGet(url);
CloseableHttpResponse response = client.execute(request);
HttpEntity entity = response.getEntity();
System.out.println(EntityUtils.toString(entity));
}
/**
* 使用httpclient3實現代理(帶密碼的代理)
*
* @throws Exception
*/
@Test
public void test4() throws Exception {
HttpClient httpClient = new HttpClient();
org.apache.commons.httpclient.auth.AuthScope authscope = new org.apache.commons.httpclient.auth.AuthScope(
ip, port);
org.apache.commons.httpclient.Credentials credentials = new org.apache.commons.httpclient.UsernamePasswordCredentials(
username, password);
httpClient.getState().setProxyCredentials(authscope, credentials);
GetMethod method = new GetMethod(url);
httpClient.executeMethod(method);
String result = new String(method.getResponseBody());
System.out.println(result);
}
/**
* 模擬登錄官網(http://mis.pyc.com.cn??
*
* @throws Exception
*/
@Test
public void testLogin() throws Exception {
HttpClientBuilder build = HttpClients.custom();
CloseableHttpClient client = build.build();
HttpPost post = new HttpPost("http://mis.pyc.com.cn/login.aspx");
List<BasicNameValuePair> params = new ArrayList<BasicNameValuePair>();
params.add(new BasicNameValuePair("__VIEWSTATE",
"/wEPDwUJNjUwNzE0MTM4ZGQzh+vF2xGjdG8Q15kIqgR0CpxhmPucdCqZOPcglRZr/w=="));
params.add(new BasicNameValuePair(
"__EVENTVALIDATION",
"/wEWBQLYtKSdCALEhISFCwKd+7qdDgKC3IeGDAK7q7GGCOqhJpRD8S8yy3ZAlPTSsmPzRUoXMK0mQvGgzlk6hm+G"));
params.add(new BasicNameValuePair("txtName", "xxxxx"));
params.add(new BasicNameValuePair("txtPwd", "xxxxxx"));
params.add(new BasicNameValuePair("btnLogin", "xxxx"));
HttpEntity entity = new UrlEncodedFormEntity(params, "UTF-8");
post.setEntity(entity);
CloseableHttpResponse response = client.execute(post);
int statusCode = response.getStatusLine().getStatusCode();
System.err.println("狀態" + statusCode);
if (statusCode == 302) {
Header[] location = response.getHeaders("location");
String rediretUrl = null;
if (location.length == 1) {
rediretUrl = "http://mis.pyc.com.cn" + location[0].getValue();
System.err.println("跳轉地址: " + rediretUrl);
}
Header[] allHeaders = response.getAllHeaders();
System.out.println("==================response===================");
for (Header header : allHeaders) {
System.err.println(header.getName() + ": " + header.getValue());
}
Header cookieHeader = response.getFirstHeader("Set-Cookie");
String cookie = cookieHeader.getValue();
System.out.println("cookie: " + cookie);
HttpGet httpGet = new HttpGet(rediretUrl);
httpGet.addHeader("Accept",
"text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8");
// httpGet.addHeader("Accept-Encoding", "gzip, deflate, sdch");
// httpGet.addHeader("Accept-Language", "zh-CN,zh;q=0.8");
httpGet.addHeader("Connection", "keep-alive");
httpGet.addHeader("Cookie", cookie);
httpGet.addHeader("Host", "mis.pyc.com.cn");
httpGet.addHeader("Referer", "http://mis.pyc.com.cn/login.aspx");
httpGet.addHeader(
"User-Agent",
"ozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/40.0.2214.115 Safari/537.36");
response = client.execute(httpGet);
HttpEntity entity2 = response.getEntity();
System.out
.println("----------------------------------------------");
System.out.println(EntityUtils.toString(entity2));
}
}
}
一、系統環境
yum update升級以后的系統版本為
[root@yl-web yl]# cat /etc/redhat-release CentOS Linux release 7.1.1503 (Core)
二、mysql安裝
# wget http://dev.mysql.com/get/mysql-community-release-el7-5.noarch.rpm # rpm -ivh mysql-community-release-el7-5.noarch.rpm # yum install mysql-community-server
安裝成功后重啟mysql服務。
初次安裝mysql,root賬戶沒有密碼。
[root@yl-web yl]# mysql -u root Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.6.26 MySQL Community Server (GPL) Copyright (c) 2000, 2015, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | test | +--------------------+ 4 rows in set (0.01 sec) mysql>
設置密碼
mysql> set password for 'root'@'localhost' =password('password'); Query OK, 0 rows affected (0.00 sec) mysql>
不需要重啟數據庫即可生效。
三、配置mysql
1、編碼
mysql配置文件為/etc/my.cnf
最后加上編碼配置
[mysql] default-character-set =utf8
這里的字符編碼必須和/usr/share/mysql/charsets/Index.xml中一致。

2、遠程連接設置
把在所有數據庫的所有表的所有權限賦值給位于所有IP地址的root用戶。
mysql> grant all privileges on *.* to root@'%'identified by 'password';
如果是新用戶而不是root,則要先新建用戶
mysql>create user 'username'@'%' identified by 'password';
此時就可以進行遠程連接了。
linux zip命令
zip -r myfile.zip ./*
將當前目錄下的所有文件和文件夾全部壓縮成myfile.zip文件,-r表示遞歸壓縮子目錄下所有文件.
2.unzip
unzip -o -d /home/sunny myfile.zip
把myfile.zip文件解壓到 /home/sunny/
-o:不提示的情況下覆蓋文件;
-d:-d /home/sunny 指明將文件解壓縮到/home/sunny目錄下;
3.其他
zip -d myfile.zip smart.txt
刪除壓縮文件中smart.txt文件
zip -m myfile.zip ./rpm_info.txt
向壓縮文件中myfile.zip中添加rpm_info.txt文件
-------------------------------------------------------------------------------
要使用 zip 來壓縮文件,在 shell 提示下鍵入下面的命令:
zip -r filename.zip filesdir
在這個例子里,filename.zip 代表你創建的文件,filesdir 代表你想放置新 zip 文件的目錄。-r 選項指定你想遞歸地(recursively)包括所有包括在 filesdir 目錄中的文件。
要抽取 zip 文件的內容,鍵入以下命令:
unzip filename.zip
你可以使用 zip 命令同時處理多個文件和目錄,方法是將它們逐一列出,并用空格間隔:
zip -r filename.zip file1 file2 file3 /usr/work/school
上面的命令把 file1、file2、 file3、以及 /usr/work/school 目錄的內容(假設這個目錄存在)壓縮起來,然后放入 filename.zip 文件中。
原文鏈接:
http://caibaojian.com/jquery-each-json.html概述
JSON(javascript Object Notation) 是一種輕量級的數據交換格式,采用完全獨立于語言的文本格式,是理想的數據交換格式。同時,JSON是 JavaScript 原生格式,這意味著在 JavaScript 中處理 JSON數據不須要任何特殊的 API 或工具包。
via在JSON中,有兩種結構:對象和數組。原文來自:http://caibaojian.com/jquery-each-json.html
1.對象
一個對象以“{”開始,“}”結束。每個“key”后跟一“:”,“‘key/value’ 對”之間運用 “,”分隔。
packJson = {"name":"caibaojian.com", "password":"111"}
2.數組
packJson = [{"name":"caibaojian.com", "password":"111"}, {"name":"tony", "password":"111"}];
數組是值的有序集合。一個數組以“[”開始,“]”結束。值之間運用 “,”分隔。
JSON對象和JSON字符串的轉換
在數據傳輸流程中,json是以文本,即字符串的形式傳遞的,而JS操作的是JSON對象,所以,JSON對象和JSON字符串之間的相互轉換是關鍵。例如:
JSON字符串:
var jsonStr = '{"name":"caibaojian", "password":"1111"}';
JSON對象:
var jsonObj = {"name":"caibaojian.com", "password":"1111"};
1、String轉換為Json對象
var jsonObj = eval('(' + jsonStr + ')');
2.Json對象轉換為String字符串
var jsonStr = jsonObj.toJSONString();
grep
<script type='text/javascript' src="/jquery.js"></script> <script type="text/javascript"> $().ready( function(){ var array = [1,2,3,4,5,6,7,8,9]; var filterarray = $.grep(array,function(value){ return value > 5;//篩選出大于5的 }); for(var i=0;i<filterarray.length;i++){ alert(filterarray[i]); } for (key in filterarray){ alert(filterarray[key]); } } ); </script>
each
<script type='text/javascript' src="/jquery.js"></script> <script type="text/javascript"> $().ready( function(){ var anObject = {one:1,two:2,three:3};//對json數組each $.each(anObject,function(name,value) { alert(name); alert(value); }); var anArray = ['one','two','three']; $.each(anArray,function(n,value){ alert(n); alert(value); } ); } ); </script>
inArray
<script type='text/javascript' src="/jquery.js"></script> <script type="text/javascript"> $().ready( function(){ var anArray = ['one','two','three']; var index = $.inArray('two',anArray); alert(index);//返回該值在數組中的鍵值,返回1 alert(anArray[index]);//value is two } ); </script>
map
<script type='text/javascript' src="/jquery.js"></script> <script type="text/javascript"> $().ready( function(){ var strings = ['0','1','2','3','4','S','6']; var values = $.map(strings,function(value){ var result = new Number(value); return isNaN(result) ? null:result;//isNaN:is Not a Number的縮寫 } ); for (key in values) { alert(values[key]); } } ); </script>
原生js遍歷json對象
遍歷json對象:
無規律:
<script> var json = [{dd:'SB',AA:'東東',re1:123},{cccc:'dd',lk:'1qw'}]; for(var i=0,l=json.length;i<l;i++){ for(var key in json[i]){ alert(key+':'+json[i][key]); } } </script>
有規律:
packJson = [ {"name":"nikita", "password":"1111"}, {"name":"tony", "password":"2222"} ]; for(var p in packJson){//遍歷json數組時,這么寫p為索引,0,1 alert(packJson[p].name + " " + packJson[p].password); }
也可以用這個:
for(var i = 0; i < packJson.length; i++){ alert(packJson[i].name + " " + packJson[i].password); }
遍歷json對象
myJson = {"name":"caibaojian", "password":"1111"}; for(var p in myJson){//遍歷json對象的每個key/value對,p為key alert(p + " " + myJson[p]); }
//code from http://caibaojian.com/jquery-each-json.html 有如下 json對象: var obj ={"name":"馮娟","password":"123456","department":"技術部","sex":"女","old":30}; 遍歷方法: for(var p in obj){ str = str+obj[p]+’,'; return str; }
Linux scp命令用于Linux之間復制文件和目錄,具體如何使用這里好好介紹一下,從本地復制到遠程、從遠程復制到本地是兩種使用方式。這里有具體舉例:
==================
Linux scp 命令
==================
scp 可以在 2個 linux 主機間復制文件;
命令基本格式:
scp [可選參數] file_source file_target
======
從 本地 復制到 遠程
======
* 復制文件:
* 命令格式:
scp local_file remote_username@remote_ip:remote_folder
或者
scp local_file remote_username@remote_ip:remote_file
或者
scp local_file remote_ip:remote_folder
或者
scp local_file remote_ip:remote_file
第1,2個指定了用戶名,命令執行后需要再輸入密碼,第1個僅指定了遠程的目錄,文件名字不變,第2個指定了文件名;
第3,4個沒有指定用戶名,命令執行后需要輸入用戶名和密碼,第3個僅指定了遠程的目錄,文件名字不變,第4個指定了文件名;
* 例子:
scp /home/space/music/1.mp3 root@www.cumt.edu.cn:/home/root/others/music
scp /home/space/music/1.mp3 root@www.cumt.edu.cn:/home/root/others/music/001.mp3
scp /home/space/music/1.mp3 www.cumt.edu.cn:/home/root/others/music
scp /home/space/music/1.mp3 www.cumt.edu.cn:/home/root/others/music/001.mp3
* 復制目錄:
* 命令格式:
scp -r local_folder remote_username@remote_ip:remote_folder
或者
scp -r local_folder remote_ip:remote_folder
第1個指定了用戶名,命令執行后需要再輸入密碼;
第2個沒有指定用戶名,命令執行后需要輸入用戶名和密碼;
* 例子:
scp -r /home/space/music/ root@www.cumt.edu.cn:/home/root/others/
scp -r /home/space/music/ www.cumt.edu.cn:/home/root/others/
上面 命令 將 本地 music 目錄 復制 到 遠程 others 目錄下,即復制后有 遠程 有 ../others/music/ 目錄
======
從 遠程 復制到 本地
======
從 遠程 復制到 本地,只要將 從 本地 復制到 遠程 的命令 的 后2個參數 調換順序 即可;
例如:
scp root@www.cumt.edu.cn:/home/root/others/music /home/space/music/1.mp3
scp -r www.cumt.edu.cn:/home/root/others/ /home/space/music/
最簡單的應用如下 :
scp 本地用戶名 @IP 地址 : 文件名 1 遠程用戶名 @IP 地址 : 文件名 2
[ 本地用戶名 @IP 地址 :] 可以不輸入 , 可能需要輸入遠程用戶名所對應的密碼 .
可能有用的幾個參數 :
-v 和大多數 linux 命令中的 -v 意思一樣 , 用來顯示進度 . 可以用來查看連接 , 認證 , 或是配置錯誤 .
-C 使能壓縮選項 .
-P 選擇端口 . 注意 -p 已經被 rcp 使用 .
-4 強行使用 IPV4 地址 .
-6 強行使用 IPV6 地址 .
Linux scp命令的使用方法應該可以滿足大家對Linux文件和目錄的復制使用了。
package com.demo.json;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import java.util.Map;
import net.sf.json.JSONArray;
import net.sf.json.JSONObject;
import org.json.simple.JSONValue;
public class JsonTest
{
public static void main(String[] args)
{
// -----------------------------------------------------------------------------
// Object 2 JSON
List<Peoper> peopers = new ArrayList<Peoper>();
Peoper p1 = new Peoper("001", "Taki", "中國");
Peoper p2 = new Peoper("002", "DSM", "China");
peopers.add(p1);
peopers.add(p2);
String result = JsonTool.getJsonString("Peopers", peopers);
System.out.println("JSON: " + result);
// 解析PHP json_encode 字符串
String jsonStr = "{\"Name\":\"\u5e0c\u4e9a\",\"Age\":20}";
Object obj = JSONValue.parse(jsonStr);
System.out.println(obj);
System.out.println();
// -----------------------------------------------------------------------------
// JSON 2 Object
String jsonString = "["
+ "{\"author\":\"7\",\"id\":358,\"title\":\"Japan\",\"pictures\":[{\"description\":\"001\",\"imgPath\":\"/cms/u/cms/www/201203/05150720ii68.jpg\"},{\"description\":\"002\",\"imgPath\":\"/cms/u/cms/www/201203/05150720ii67.jpg\"}],\"path\":\"ip\"},"
+ "{\"author\":\"8\",\"id\":359,\"title\":\"China\",\"pictures\":[{\"description\":\"101\",\"imgPath\":\"/cms/u/cms/www/201203/111111111111.jpg\"},{\"description\":\"102\",\"imgPath\":\"/cms/u/cms/www/201203/222222222222.jpg\"}],\"path\":\"ip\"}]";
JSONArray array = JSONArray.fromObject(jsonString);
// Content.class包含pictures.class,需要設置這個參數
Map<String, Class<pictures>> classMap = new HashMap<String, Class<pictures>>();
classMap.put("pictures", pictures.class);
Object[] objs = new Object[array.size()];
for (int i = 0; i < array.size(); i++)
{
JSONObject jsonObject = array.getJSONObject(i);
objs[i] = (Content) JSONObject.toBean(jsonObject, Content.class, classMap);
}
// 轉換Content,循環輸出所有content
for (int i = 0; i < objs.length; i++)
{
Content content = (Content) objs[i];
System.out.println("author:" + content.getAuthor() + " ID:"
+ content.getId() + " Title:" + content.getTitle() + " Path:" + content.getPath());
// 轉換pictures,循環輸出所有picture
List<pictures> pictures = content.getPictures();
for (int n = 0; n < pictures.size(); n++)
System.out.println("description:"
+ pictures.get(n).getDescription() + " imgPath:" + pictures.get(n).getImgPath());
}
}
}
package com.demo.json;
import java.util.regex.Matcher;
import java.util.regex.Pattern;
import net.sf.json.JSONObject;
public class JsonTool
{
public static String getJsonString(Object key, Object value)
{
//System.out.println("key: " + key);
//System.out.println("value: " + value.toString());
JSONObject obj = new JSONObject();
obj.put(key, value); //添加物件
return obj.toString(); //轉換為字符串并返回
}
//解析PHP json_encode 字符串
public static String unescapeUnicode(String str)
{
StringBuffer b=new StringBuffer();
Matcher m = Pattern.compile("\\\\u([0-9a-fA-F]{4})").matcher(str);
while(m.find())
{
b.append((char)Integer.parseInt(m.group(1),16));
}
return b.toString();
}
}
package com.demo.json;
public class People
{
public People()
{
}
public People(String id, String name, String address)
{
this.id = id;
this.name = name;
this.address = address;
}
private String id;
private String name;
private String address;
public String getId() {
return id;
}
public void setId(String id) {
this.id = id;
}
public String getName() {
return name;
}
public void setName(String name) {
this.name = name;
}
public String getAddress() {
return address;
}
public void setAddress(String address) {
this.address = address;
}
public String toString()
{
return "ID:" + this.id + " Name:" + this.name + " Address:" + this.address;
}
}
package com.demo.json;
import java.util.List;
public class Content {
private String author;
private String id;
private String title;
private List<pictures> pictures;
private String path;
public String getAuthor() {
return author;
}
public void setAuthor(String author) {
this.author = author;
}
public String getId() {
return id;
}
public void setId(String id) {
this.id = id;
}
public String getTitle() {
return title;
}
public void setTitle(String title) {
this.title = title;
}
public List<pictures> getPictures() {
return pictures;
}
public void setPictures(List<pictures> pictures) {
this.pictures = pictures;
}
public String getPath() {
return path;
}
public void setPath(String path) {
this.path = path;
}
}
package com.demo.json;
public class pictures {
private String description;
private String imgPath;
public String getDescription() {
return description;
}
public void setDescription(String description) {
this.description = description;
}
public String getImgPath() {
return imgPath;
}
public void setImgPath(String imgPath) {
this.imgPath = imgPath;
}
}
使用jQuery進行DOM元素的操作和遍歷
首先確定妳在頁面引用的jQuery庫,才能使用它。然后簡單地使用jQuery()或者它的簡化形式$(), 傳遞一個選擇器作為它的第一個參數。選擇器通常是一個指定了一個或多個元素的字符串。清單20展示了一些基本的jQuery選擇器的使用。
Listing 20. Basic jQuery selectors
<script type="text/javascript"> var allImages = $("img"); // all IMG elements var allPhotos = $("img.photo"); // all IMG elements with class "photo" var curPhoto = $("img#currentPhoto"); // IMG element with id "currentPhoto" </script> |
需要記住的一點是jQuery方法返回的始終是一個jQuery對象。這種對象支持鏈式操作(見清單21)。這一特性在其他JavaScript框架中也是通用的。
Listing 21. Basic jQuery operation with chained method calls
<script type="text/javascript"> $("img").css({"padding":"1px", "border": "1px solid #333"}) .wrap("<div class='img-wrap'/>"); </script> |
上述代碼選中頁面中所有img元素并設置padding和border, 然后用一個帶img-wrap class 的div 來包裹所有這些img.
清單22則展示了jQuery 是如何將前面章節的一個例子進行簡化。
Listing 22. Creating and injecting a DOM node with jQuery
<script type="text/javascript"> alert($("h1:first").html()); // .text() also works and might be better suited here $("#auth").text("Sign Out"); var $li = $("<li>List Item Text</li>"); // $ is used as var prefix to indicate jQuery object $("ul#nav").append($li); </script> |
使用jQuery 處理XML
之前有提到過傳遞給jQuery $()的第一個參數是一個字符串形式的選擇器。第二個不起眼的參數則允許你設置context,或者開始一個jQuery節點,抑或把當前選擇的元素當作 一個根節點來使用。默認jQuery會把Document作為當前的Context, 但更好的做法是把context指定得更詳細更一些,具體到某個特定的元素身上。在進行XML處理時,需要把context設置為XML的根節點(見清單 23)。
Listing 23. Retrieving values from an XML document with jQuery
<script type="text/javascript"> // get value of single node (with jQuery) var description = $("description", xmlData).text(); // xmlData was defined in previous section // get values of nodes from a set (with jQuery) var relatedItems = $("related_item", xmlData); var relatedItemVals = []; $.each(relatedItems, function(i, curItem){ relatedItemVals.push(curItem.text()); }); </script> |
上述代碼使表示變得相當簡潔。通過向jQuery傳遞節點名稱和設置它的context為xmlData,可以很方便地獲取想要的節點。取得元素的值,剛需要一翻周折了。
因為innerHTML 對 于非HTML元素不管用,所以就不能使用jQuery的html()方法來獲取節點的值。jQuery 雖然提供了一個跨瀏覽器的方法innerText 來獲取元素的值,但當用來處理XML時在瀏覽器間仍有些差異。比如IE會把包含空值(空格,Tab點位 符,換行)的節點給忽略掉,而處理這樣的情況時,FireFox則會把這些節點當作正常節點。為了避免這點不一致性,可以創建一個函數來處理。這個函數里 需要用到一些jQuery函數: contents(), filter() 和 trim()。
Listing 24. Cross-browser JavaScript functions for accurate text value retrieval of a node
<script type="text/javascript"> /** * Retrieves non-empty text nodes which are children of passed XML node. * Ignores child nodes and comments. Strings which contain only blank spaces * or only newline characters are ignored as well. * @param node {Object} XML DOM object * @return jQuery collection of text nodes */ function getTextNodes(node){ return $(node).contents().filter(function(){ return ( // text node, or CDATA node ((this.nodeName=="#text" && this.nodeType=="3") || this.nodeType=="4") && // and not empty ($.trim(this.nodeValue.replace("\n","")) !== "") ); }); } /** * Retrieves (text) node value * @param node {Object} * @return {String} */ function getNodeValue(node){ var textNodes = getTextNodes(node); var textValue = (node && isNodeComment(node)) ? // isNodeComment is defined above node.nodeValue : (textNodes[0]) ? $.trim(textNodes[0].textContent) : ""; return textValue; } </script> |
現在來看看如何設置節點的值(見清單25)。示例代碼中有兩點需要注意:一是設置根結果的文本值會重寫所有子節點。另外就是如果一個節點之前是沒有值的,那么就用 node["textContent"]而不是node.textContent。因為在IE中空節點根本就沒有textContent屬性。
Listing 25. Cross-browser JavaScript function for accurate setting of the text value of a node
<script type="text/javascript"> function setNodeValue(node, value){ var textNodes = getTextNodes(node); if (textNodes.get(0)){ textNodes.get(0).nodeValue = value; } else { node["textContent"] = value; } } </script> |
DOM屬性與jQuery
在之前的一些例子中已經展示了即使用最原始的JavaScript來處理DOM中的屬性也是非常直觀明了的了。同樣地,jQuery也提供了相應的簡化方式。更重要的是,屬性可以用在選擇器中,非常的強大。
Listing 26. Getting and setting DOM element attributes with jQuery
<script type="text/javascript"> var item = $("item[content_id='1']", xmlData); // select item node with content_id attribute set to 1 var pubDate = item.attr("date_published"); // get value of date_published attribute item.attr("archive", "true"); // set new attribute called archive, with value set to true </script> |
從代碼中可以看出,jQuery的attr()方法即可以設置設置也可以返回屬性值。更強大的是jQuery允許在選擇器中提供屬性來返回特定的元素。下如上面的代碼所展示的那樣,我們獲取到了content_id為1的元素。
通過jQuery的Ajax來裝載XML
或許你已經有所了解,Ajax是用JavaScript來異步從服務器獲取XML的一種Web技術。Ajax本身是依賴XMLHttpRequest (XHR) 所提供的API來向服務器發送請求和從服務器獲取響應的。jQuery除了提供強大的用于遍歷和處理DOM元素的方法外,還提供了跨瀏覽器的Ajax支持。也就是說通過Ajax獲取XML簡單得就是調用Ajax的get方法。清單27展示了這樣的例子。
Listing 27. Loading an external XML file with jQuery's Ajax method
<script type="text/javascript"> $.ajax({ type : "GET", url : "/path/to/data.xml", dataType : "xml", success : function(xmlData){ var totalNodes = $('*',xmlData).length; // count XML nodes alert("This XML file has " + totalNodes); }, error : function(){ alert("Could not retrieve XML file."); } }); </script> |
$.ajax()方法有一系列豐富的選項設置,并且可以通過其他一些簡化的變形方式來調用,比如$.getScript()會導入JavaScript腳本并執行,$.getJSON()會獲取JSON數據然后可以在Success回調中使用。當裝載XML文件時,妳需要了解一下Ajax的基本語法。如上面代碼所示,我們設置類型為get,url設置為從"/path/to/data.xml"這個路徑獲取XML文件,然后還指明文件類型為XML。當從服務器獲取了數據后,success 或error中的一個方法會被觸發。本例中,裝載成功的話會彈出窗口顯示所有節點數目。jQuery的星號選擇器表示匹配所有元素。最重要的一點是在回調函數中,第一個參數用來接收從服務器返回的數據。這個參數的名字隨便起,接下來的Context就被設置成了這個返回的數據。
在處理Ajax相關的請求時需要注意跨域問題,出于安全性考慮一般不允許從不同的域獲取文件。所以上述例子中的代碼可能在妳實際的程序中有所不同。
像處理XML一樣處理外部的XHTML
因為XHTML是XML的一個子集,所以像XML一樣處理XHTML是完全沒有問題的。至于為什么妳有處理XHTML的需求是另一回事,但事實是妳確實可以這樣做。比如,導入一個XHTML頁面然后從中解析數據是可行的,雖然我會建議用另外更強健的方法來實現。
盡管之前講述了DOM元素的遍歷和處理,jQuery同時也可以用來處理XML,雖然需要先將XML文件破費周折地裝載進代碼中。本節的內容包含了不同的方法和基本的用于完成XML處理的例子。
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>省市區三級級聯</title>
<script src="jquery-1.8.0.js"></script>
<script>
var d;
$(document).ready(function (){
$.ajax({
url:"city.xml",
dataType:"xml",
success:function(data){
d = data;
$(data).find("province").each(function (i){
//往province中添加值
$("<option></option>").html($(this).attr("name")).attr("value",$(this).attr("name")).appendTo("#province");
});
chpro($("#province").attr("value")); //選中的值傳給chpro函數
}
});
});
var c;
function chpro(val){
$("#city").empty(); //清空
//遍歷province的name為val下的city
$(d).find("province[name='"+val+"']").find("city").each(function (i){
//往city中添加值 設置屬性value的值為當前對象的屬性name的值
$("<option></option>").html($(this).attr("name")).attr("value",$(this).attr("name")).appendTo("#city");
c = val;
chcity($("#city").attr("value"));
});
}
function chcity(val){
$("#area").empty();
//遍歷province的name為c下的city的name為val下的area
$(d).find("province[name='"+c+"']").find("city[name='"+val+"']").find("area").each(function (i){
$("<option></option>").html($(this).attr("name")).attr("value",$(this).attr("name")).appendTo("#area");
});
}
</script>
</head>
<body>
<form id="myform">
地址:<select id="province" onchange="chpro(this.value)" style="width:150px"></select>
<select id="city" onchange="chcity(this.value)" style="width:150px"></select>
<select id="area" style="width:150px"></select>
</form>
</body>
</html>
文章主要參考于:http://www.ruanyifeng.com/blog/2012/05/responsive_web_design.html(阮一峰的網絡日志)
在這篇文章的基礎上加上了寫自己的理解(文章藍色部分)。
一. 允許網頁寬度自動調整:
"自適應網頁設計"到底是怎么做到的?其實并不難。
首先,在網頁代碼的頭部,加入一行viewport元標簽。
<meta name="viewport" content="width=device-width, initial-scale=1" />
viewport是網頁默認的寬度和高度,上面這行代碼的意思是,網頁寬度默認等于屏幕寬度(width=device-width),原始縮放比例(initial-scale=1)為1.0,即網頁初始大小占屏幕面積的100%。
對于viewport屬性,我是真正在接觸移動web開發是才遇到的,一般的pc布局都是固定的960px,1000px這種。
下面三篇文章是對viewport屬性詳細的解釋:
Viewport(視區概念)——pc端的理解
Viewport(視區概念)——移動端的應用
viewport ——視區概念(轉)
對于老式IE6,7,8瀏覽器需要js處理,由于主要平臺是ios和安卓,所以可以暫時不考慮
二. 不使用絕對寬度
由于網頁會根據屏幕寬度調整布局,所以不能使用絕對寬度的布局,也不能使用具有絕對寬度的元素。這一條非常重要。
具體說,CSS代碼不能指定像素寬度:
width:xxx px;
只能指定百分比寬度:
width: xx%;
或者:
width:auto;
這里開發是指一個網頁不僅能用在pc上,也能同時用于移動端,但是對于webapp這種還是需要單獨做一個webapp使用的頁面。
對于這個知識點,對于我目前做的項目有用處,主要用于控制限定數據庫里讀出來的圖片寬度。
詳見:手機webapp的jquery mobile初次使用心得和解決圖片自適應大小問題
三. 相對大小的字體
字體也不能使用絕對大小(px),而只能使用相對大小(em)。
body {
font: normal 100% Helvetica, Arial, sans-serif;
}
上面的代碼指定,字體大小是頁面默認大小的100%,即16像素。
h1 {
font-size: 1.5em;
}
然后,h1的大小是默認大小的1.5倍,即24像素(24/16=1.5)。
small {
font-size: 0.875em;
}
small元素的大小是默認大小的0.875倍,即14像素(14/16=0.875)。
四. 流動布局(fluid grid)
"流動布局"的含義是,各個區塊的位置都是浮動的,不是固定不變的。
.main {
float: right;
width: 70%;
}
.leftBar {
float: left;
width: 25%;
}
float的好處是,如果寬度太小,放不下兩個元素,后面的元素會自動滾動到前面元素的下方,不會在水平方向overflow(溢出),避免了水平滾動條的出現。
另外,絕對定位(position: absolute)的使用,也要非常小心。
五. "自適應網頁設計"的核心,就是CSS3引入的Media Query模塊。
它的意思就是,自動探測屏幕寬度,然后加載相應的CSS文件。
<link rel="stylesheet" type="text/css"
media="screen and (max-device-width: 400px)"
href="tinyScreen.css" />
上面的代碼意思是,如果屏幕寬度小于400像素(max-device-width: 400px),就加載tinyScreen.css文件。
<link rel="stylesheet" type="text/css"
media="screen and (min-width: 400px) and (max-device-width: 600px)"
href="smallScreen.css" />
如果屏幕寬度在400像素到600像素之間,則加載smallScreen.css文件。
除了用html標簽加載CSS文件,還可以在現有CSS文件中加載。
@import url("tinyScreen.css") screen and (max-device-width: 400px);
六. CSS的@media規則
同一個CSS文件中,也可以根據不同的屏幕分辨率,選擇應用不同的CSS規則。
@media screen and (max-device-width: 400px) {
.column {
float: none;
width:auto;
}
#sidebar {
display:none;
}
}
上面的代碼意思是,如果屏幕寬度小于400像素,則column塊取消浮動(float:none)、寬度自動調節(width:auto),sidebar塊不顯示(display:none)。
這篇文章有詳細的講解:手機web——自適應網頁設計(@media使用)
七. 圖片的自適應(fluid image)
除了布局和文本,"自適應網頁設計"還必須實現圖片的自動縮放。
這只要一行CSS代碼:
img { max-width: 100%;}
這行代碼對于大多數嵌入網頁的視頻也有效,所以可以寫成:
img, object { max-width: 100%;}
老版本的IE不支持max-width,所以只好寫成:
img { width: 100%; }
此外,windows平臺縮放圖片時,可能出現圖像失真現象。這時,可以嘗試使用IE的專有命令:
img { -ms-interpolation-mode: bicubic; }
或者,Ethan Marcotte的imgSizer.js。
addLoadEvent(function() {
var imgs = document.getElementById("content").getElementsByTagName("img");
imgSizer.collate(imgs);
});
不過,有條件的話,最好還是根據不同大小的屏幕,加載不同分辨率的圖片。有很多方法可以做到這一條,服務器端和客戶端都可以實現。
遇到這種問題,請參照這種寫法
s|Application {
fontSize:14;
color:blue;
paddingLeft: 10px;
paddingRight: 10px;
paddingTop: 10px;
paddingBottom: 10px;
horizontalAlign: "left";
}